178 Enterprise Fabric Suite 2007 User Guide • September 2008
FIGURE6-5 Detailed Media Display Dialog
The Detailed Media Display dialog (FIGURE6-5) is opened after you click the (i)
button at the top of the Port column. The data displayed is a snapshot of the values
of that particular media at the time the dialog is displayed. The dialog displays a
more detailed look at the media inserted into a specific port. The values are read-
only; they serve as a snapshot for that time and do not change.
The media information will be polled, and changes in data values, changes in status,
new media being inserted, media being unplugged should be reflected in the data on
display in the table.
The upper half of the dialog contains information about the media plugged into the
port: Vendor, Part Number, Revision, Serial Number, Type, and Speeds Supported.
The lower half of the dialog contains a table of diagnostic data specific to the media
plugged into the port. For each of the 5 values (Temperature, Voltage, Tx Bias, Tx
Power, and Rx Power), the current value, status, high alarm, high warning, low
warning, and low alarm values will be displayed. The default for each of the fields is
“N/A” until the data is read.