Model
¾There’s an indicator LED next to the slide switch that comes on when the output resolution is one of the standard HDTV resolutions AND the slide switch is in YPbPr.
¾To operate the unit you use 3
¾To quickly jump to a known resolution (instead of walking through them one by one using the MODE switch), pressing two buttons simultaneously jumps to a given resolution/refresh rate. Pressing the left two buttons gets you to XGA at 60 Hz (and subsequent pressing of the MODE button will take you up from there). Pressing the right two buttons gets you to 480p (a standard HDTV mode). Please note that in these HDTV modes, the DVI is outputting the proper signal and if the slide switch is in VGA you are getting RGBHV output and if in YPbPr you get component video (with sync on Y) and the LED will light to indicate that the unit is outputting a proper YPbPr output.
¾If the OSD is not displayed, pressing the MODE button once will redisplay the current resolution. The resolution will only change when the OSD is displayed.
¾Here is a list of output resolutions that the Mode button will walk you through (there’s an on screen display OSD which indicates the mode setting):
PC Resolutions
VGA | 640 X 480 @ 50/60/72/75/85 Hz |
| |
SVGA | 800 X 600 @ 50/56/60/72/75/85 Hz |
| |
XGA | 1024 X 768 | @ 50/60/70/75/85 Hz | |
WXGA | 1280 X 768 | @ 50/60 Hz |
|
SXGA | 1280 X 1024 @ 50/60 Hz |
| |
| HDTV Resolutions |
| |
480p | 720 X 480 @ 50/60 Hz | ||
576p | 720 X 576 @ 50/60 Hz |
| |
720p | 1280 X 720 | @ 50/60 Hz |
|
1080p | 1920 X 1080 @ 60 Hz |
|
6