Sun Microsystems Ethernet MMF/UTP Adapter manual Ipge Driver Parameter, Status, and Descriptions

TABLE 3-4describes the parameters and settings for the ipge device driver.

TABLE 3-4	ipge Driver Parameter, Status, and Descriptions
Parameter	Status	Description
instance	Read and write	Device instance
adv-autoneg-cap	Read and write	Operational mode parameter
adv-1000fdx-cap	Read and write	Operational mode parameter
adv-1000hdx-cap	Read and write	Operational mode parameter
adv-100T4-cap	Read and write	Operational mode parameter
adv-100fdx-cap	Read and write	Operational mode parameter
adv-100hdx-cap	Read and write	Operational mode parameter
adv-10fdx-cap	Read and write	Operational mode parameter
adv-10hdx-cap	Read and write	Operational mode parameter
adv-asmpause-cap	Read and write	Flow control parameter
adv-pause-cap	Read and write	Flow control parameter
master-cfg-enable	Read and write	Gigabit link clock mastership controls
master-cfg-value	Read and write	Gigabit link clock mastership controls
use-int-xcvr	Read only	Use internal transceiver
enable-ipg0	Read and write	Enable additional delay before transmitting a packet
ipg0	Read and write	Additional delay before transmitting a packet
ipg1	Read and write	Interpacket gap parameter
ipg2	Read and write	Interpacket gap parameter
rx-intr-pkts	Read and write	Receive interrupt blanking values
rx-intr-time	Read and write	Receive interrupt blanking values
accept-jumbo	Read and write	Enable Jumbo Frames

Chapter 3 Configuring ipge and e1000 Driver Parameters 35