Sun Microsystems VSM GUI manual Order check-order

loadmodule module

Preloads the specified CGI module. The default is to dynamically load and unload such modules as required.

maxclients number

Specifies the maximum number of worker tasks that can run.

maxrequestsperchild number

Sets the maximum number of requests to be serviced by a worker task before it is restarted. The default is no limit.

maxpasswordlength number

Sets the maximum allowed length of a password. Defaults to 8 characters.

maxuseridlength number

Sets the maximum allowed length of a password. Defaults to 8 characters.

messageprefix prefix

Specifies the three-character prefix for server messages. Default is “SKY”.

order check-order

Specifies the order in which a connection source ip address is checked against any allow and/or deny parameters.

Allowable sequences:

allow-deny - Allow directives are checked before deny directives. Unmatched requests are denied.

deny-allow - Deny directives are checked before allow directives. Unmatched requests are allowed.

mutual-exclusion - Only requests that are allowed by an allow directive and are not forbidden by a deny directive are allowed.

For example: order allow-deny

The default order is deny-allow. Note that disallowed connections are silently dropped for security reasons and no error messages are returned to such connections.

receivebuffersize value

Changes the TCP receive buffer size if authorized. Valid range is 4096 to 65536. Default is the TCP/IP stack default.

sockimplementation type

Specifies the socket implementation to be used by the server.

Socktimeout period

Specifies the socket timeout in seconds.

24 VSM GUI Getting Started Guide • July 2007 Rev A • 312651601