Hard disk information is unknown
When running the
Serial port test fails
The
SunVTS Diagnostics Software Issues
The following issue applies to SunVTS™ diagnostics software.
SunVTS I/O port test fails
The SunVTS I/O port test fails when the system is in exerciser mode. This occurs because the test fails to read written bytes at various baud rates when the system is under heavy stress.
Workaround:
Run the SunVTS I/O port test in standalone or in component mode.
Operating System Issues
This section contains the following:
■“Solaris Issues” on page 20
■“Warning message might appear during startup” on page 20
■“Solaris OS installation halts during the installation” on page 20
■“Linux Issues” on page 21
■“USB device errors reported in Red Hat 5.1” on page 21
■“Unable to hot plug
■“PCI BIOS error message might appear” on page 22
■“IGB error message might appear” on page 22
■“Error messages might appear in SLES 10 OS dmesg” on page 22
Sun Blade X6440 Server Module Product Notes | 19 |