2.Reboot the system for the changes to take effect.
3.Run Windows Autorun to install drivers.
Yellow question mark might appear in Windows Device Manager
A yellow question mark might appear in the Windows Device Manager, denoting that drivers are not installed for the following devices:
■Sun Blade Storage SCSI Enclosure Device
■Sun NEM Plus SCSI Enclosure Device
Workaround:
Run Windows Update to install the necessary drivers.
System does not boot from floppy drive image
The system does not boot Windows from a floppy drive image installation. This occurs because the BIOS sets the virtual floppy as the first (top) USB bootable device.
Workaround:
1.During system boot, press F2 to enter the BIOS Setup Utility.
2.From the Boot/USB devices menu, change the device boot order to set the virtual CDROM as the first (top) USB bootable device.
Sun StorageTek RAID Expansion Module (REM) Issues
Use the StorageTek BIOS setup utility
Before the operating system can use hard disk drives attached to a StorageTek SAS controller, the drives must first be initialized and an array created using the StorageTek BIOS Setup Utility. The StorageTek BIOS Setup Utility can be accessed by pressing the CTRL + A keystroke combination during the server blade power on
Sun Blade X6440 Server Module Product Notes | 25 |
