Sunbeam manual Using your Sunbeam Oskar 400

Using your Sunbeam Oskar 400 (cont).

5.Place the continuous flow attachment onto the top of the processing bowl, so that the pin on the continuous flow attachment slides into the hole at the top of the slicing/shredding disc. Ensure that the large locking tab on the continuous flow attachment is on the right-hand side, near the horizontal slot at the back of the processor body (9).

(9)

6.Plug in the food processor and turn the power ‘ON”.

7.Load the feed tube with the food to be processed (10).

(10)

8.Place a bowl under the chute of the continuous flow attachment (11).

(11)

9.Rest the food pusher in the feed tube. Now, holding the food pusher with one hand and the feed tube with the other, turn the continuous flow attachment to the left (anti-clockwise) until the large tab slides into the horizontal slot at the back of the processor body. This will engage the automatic switch and the food processor will turn on (12).

(12)

Note: Unless the locking tab on the continuous flow attachment is engaged, the unit will not turn on.

8