Control panel |
|
| A |
| B |
| C |
D | E |
Understanding the Controls
Your control panel is divided into 2 parts. The left side of each button indicates the automatic brewing functions (See D in Figure). The right side indicates the manual function of each button (See E in Figure).
Lights Indicate:
-Unit is heating up
-Unit is brewing/frothing/cleaning
-Unit is ready for use
-Milk Reservoir not fully inserted in unit.
Espresso (Button A):
Cappuccino (Button B):
Latte (Button C):
NOTE: Please read the rest of the instructions before operating the MR. COFFEE® Café Barista (espresso, cappuccino & latte maker).
INTRODUCTION
Congratulations! You have selected the new and innovative
Mr. Coffee® Café Barista (espresso, cappuccino & latte maker). This unique appliance has been designed to help you prepare delicious espressos, cappuccinos and lattes quickly, conveniently, and automatically with the touch of a button.
ESPRESSO
A unique method of coffee brewing in which hot water is forced through finely ground coffee. Popular in Europe, it is a far richer and more
CAPPUCCINO
A drink made with about 1/3 espresso, 1/3 steamed milk, and 1/3 frothed milk.
LATTE
A drink made with about 1/4 espresso and 3/4 steamed milk.
Please read ALL of the instructions, cautions, notes and warnings included in this instruction manual carefully before you begin to use this appliance. When this unit is used, some parts and accessories get hot and need to cool down. Proper care and maintenance will ensure the long life of the MR. COFFEE® Café Barista and its
IMPORTANT SAFETY INSTRUCTIONS
Please follow these important safety instructions while using your unit:
1.Before removing any of the parts and accessories, make sure the unit is not brewing or frothing.
2.Do not remove the
3.Use caution when removing the
4.If coffee does not drip, the filter is blocked. Turn off the appliance and allow it to cool down. The blockage may be caused by the coffee being too finely ground. See the “TROUBLESHOOTING” section.
5.WHEN CLEANING THE FROTHED MILK DISPENSING TUBE: Place a large cup under the tube. Using the Frothing Tube Lever, aim the Frothed Milk Dispensing Tube towards the center of the cup. Turn the Froth Control Knob clockwise to the clean position “” then press the latte/clean button for 3 seconds and release to activate the clean function. The unit will dispense the water through the tube for approximately 30 seconds.
NOTE: In order for your unit to work properly time after time, clean it after every use.
English 6 | English 7 |