Programming your espresso machine
The Café Series™ Twin Thermoblock Espresso Machine has programming capabilities. Based on café settings the 
single and 
double espresso functions are set at 35 and 70mls. However by following a few simple steps the coffee maker can personalise the espresso machine to achieve a serve of espresso to exactly how they like it.
Programming 
Single Espresso
1.Prepare the filter handle. Fit the filter handle with the one cup filter basket (27) and fill with finely ground coffee (28). Using the coffee tamp supplied, tamp the coffee grinds (29). Secure the filter handle to the group head (30)(31).
2.Place a cup under both pouring spouts.
3.To commence programming press the ‘PROGRAM’ button (32). The light above the ‘PROGRAM’ button will show a constant red light and the light above the ‘MANUAL’ button will go off. Additionally the lights above the ‘POWER’, 
single
and 
double espresso buttons will remain on.
4.Press the 
single espresso button once to start the espresso pour (33). The light
above the 
double espresso button will go off and only the ‘POWER’, 
single espresso and ‘PROGRAM’ lights will remain on.
5.Allow the espresso to pour until the desired level. Once the desired level is reached stop the espresso pour by pressing the
single espresso button. 2 beeps will signify that the new setting for the 
single espresso operation has been programmed and stored into the machines memory.
6.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button.
Programming 
Double Espresso
1.Prepare the filter handle. Fit the filter handle with the two cup filter basket (27) and fill with finely ground coffee (28). Using the coffee tamp supplied, tamp the coffee grinds (29). Secure the filter handle to the group head (30)(31).
2.Place two cups under each pouring spout.
3.To commence programming press the ‘PROGRAM’ button (32). The light above the ‘PROGRAM’ button will show a constant red light and the light above the ‘MANUAL’ button will go off. Additionally the lights above the ‘POWER’, 
single and 
double espresso buttons will remain on.
4.Press the 
double espresso button once to start the espresso pour (34). The light above the 
single espresso button will
go off and only the ‘POWER’, 
double espresso and ‘PROGRAM’ lights will remain on.
5.Allow the espresso to pour until the desired level. Once the desired level is reached stop the espresso pour by pressing the
double espresso button. 2 beeps will signify that the new setting for the 
double espresso operation has been programmed and stored into the machines memory.
6.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button.
Resetting the Factory Settings
To revert back to the original factory settings;
1.Insert the power cord into a
18
