Care and Cleaning.
IMPORTANT: Do not use metal utensils on the hot plate as these will scratch the
Do not leave plastic utensils in contact with hotplate while cooking.
Before cleaning, turn the power OFF then REMOVE the plug from the power outlet and the Heat Control Probe from the socket of the Kettle BBQ.
Heat Control Probe.
If cleaning is necessary, wipe over with a damp cloth.
Do not immerse the control probe in water or any other liquid.
NEVER use the Kettle BBQ control probe in any other appliance.
Storage
Store the probe carefully in a safe place. Do not knock or drop it as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Service Centre for inspection. Refer to the back of your instruction book for Service Centre listings.
Hotplate and Drip Tray.
The element in the hotplate is totally sealed, so it is safe to fully immerse in water. Wash the hotplate and drip tray in warm soapy water using a mild household detergent and a soft washing sponge.
A bottle brush may be used to clean the drainage holes in the ribbed hotplate.
The hotplate and drip tray are also dishwasher safe.
Do not use abrasives or metal scourers as they will scratch the
Moulded Base and Lid.
The base and lid can be wiped over with a damp cloth or washed in warm soapy water using a mild household detergent and a soft washing sponge.
Do not place the moulded base or lid in a dishwasher.
Do not use abrasives or metal scourers as they may scratch these parts.
Stand
The stand can be wiped over with a damp cloth. Do not place any part of the stand in a dishwasher.
Storage.
Always dry and assemble the Kettle BBQ before storing. Ensure the drip tray and hotplate are correctly positioned.
For outdoor storage of your Kettle BBQ, remove the control prove and store in a safe, dry place.
Important:
Before inserting control probe in probe socket ensure the interior of the socket is fully dry. To do this wipe interior of socket with a dry cloth or shake out excess water vigorously.
Sunbeam is a Registered trademark. Made in China. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this booklet. Approved by the appropriate Electrical Supply Authorities. Backed by Sunbeam’s 12 Month Replacement Guarantee and National Service Network.
© Copyright. SUNBEAM CORPORATION LIMITED 2001. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771
For more information or advice on any Sunbeam products, contact the Sunbeam Consumer Service Line on 1800 025 059 in Australia. In New Zealand - contact the Sunbeam Office in Auckland on 09 912 0747.
6
