Sunbeam MX7700 manual Using your Sunbeam Mixmaster Series, Before using your Mixmaster Series

Using your Sunbeam Mixmaster Series II

Before using your Mixmaster Series II

Before assembling your Sunbeam Mixmaster Series II, be sure the power cord is unplugged from the power outlet and the speed control dial is in the 'O' position.

1.Press the ‘tilt' button, located on the neck of the Mixmaster and swing the mixer head up, see Figure 1. The mixer head will lock into this tilt position.

Figure 1

Inserting attachements
3a.Take the two beaters, place the
oval shaped beater (A) into the
left socket, (outer position).
Place the other beater, with
the plastic nodules on the base A	B

(B)into the right socket, (inner position), see Figure 2.

Figure 2

B

A

Press 'tilt' button and tilt the mixer head backward.

3b. Take the two dough hooks, place the dough hook with the shorter hook at the bottom (A) into the left socket, (outer position). Likewise, place the dough hook with the longer hook at A B the bottom (B) into the right socket, (inner position), see Figure 3.

Figure 3

B

2.Select the desired attachments depending on the mixing task to be performed;

–Beaters for creaming butter and sugar, mixing cake mixes and whisking cream and egg whites.

–Dough hooks for kneading dough and other heavy mixtures.

4

A

Important: Please review Figure 4. The illustration on the left is how the dough hooks should look when correctly inserted. However should the dough hooks once