Sunbeam MX7700 manual Role of the Twin-motor 3-way beating action

Using your Sunbeam Mixmaster Series II (continued)

bowl speed should be set on the 'LO' speed setting. For light mixes requiring maximum mixing performance such as cakes and meringue, the 'HI' bowl speed is recommended as this passes the mixture through the beaters more often for faster results. For large volumes the bowl speed should be reduced to "LO", particularly in thick mixtures.

2.When mixing is complete, turn the speed control dial to the 'O' position and unplug the cord from the power outlet.

Note: The indicator light will stay on until power is disconnected from the mixer.

3.Hold down the ‘tilt’ button and ease the Mixmaster head back until the mixer head is locked into the tilt back position, see Figure 1.

4.To remove the particular attachments (either beaters or dough hooks), place

fingers loosely around the attachments and hold down the ‘beater eject’ button see Figure 7.

	Beater
Figure 7	Eject
	Button

Role of the Twin-motor 3-way beating action

One motor is located in the head of the Mixmaster. This drives the individual beaters, turning each in opposite directions.

The second motor is located in the neck of the Mixmaster and drives the turntable, in turn rotating the bowl. High or low bowl speed can be selected by simply turning the control dial positioned on the neck of the Mixmaster Series II.

These actions combine to ensure a more powerful and thorough mixing result.

6