Sunbeam MX7700 manual Using your Mixmaster Series, Selecting the mixing bowl speed

Using your Sunbeam Mixmaster Series II (continued)

inserted appear to be touching, as they do in the illustration on the right, then they have been inserted incorrectly.

Figure 4

Note: Be sure both beaters or dough hooks click firmly in place, you may need to twist the attachments slightly to engage them in position prior to pushing them into place.

Attachments can only be locked in place if they are in the correct socket. If only one of the attachments will lock in place, the attachments are in the wrong sockets.

4.Place the mixing bowl onto the metal base plate so that it is sitting evenly. Lock the bowl into place by turning it clockwise, see Figure 5.

Figure 5

����������

5.Press ‘tilt’ button to lower the head with the selected attachments (either, beaters or dough hooks) in place, into the mixing bowl. See Figure 6.

Figure 6

Press 'tilt' button down and tilt mixer head forward

Using your Mixmaster Series II

1.With the speed control dial in the 'O' position, plug the power cord into a 230-240 volt power outlet.

Note: The power indicator light on the speed control dial will now be illuminated.

2.Use the speed control dial to turn the Mixmaster ON and OFF and to control the mixing speeds.

Clearly marked instructions for correct mixing speeds for each type of mixture are shown in the ‘Mixing Guide’ on page 7.

Tip: Start mixing at slow speeds and increase speed gradually to prevent ingredients splashing out of the mixing bowl. When adding dry ingredients, particularly flour, lower the speed temporarily until ingredients are combined.

Tip: When kneading yeast doughs, use speed 1 to achieve best results. For specific instructions for the use of dough hooks see 'Helpful Hints for a Successful Dough' on page 13.

Selecting the mixing bowl speed

1.The mixing bowl automatically turns on when the speed control dial is turned

on. For majority of mixing tasks the 5