Using your Pro Glide® Plus 8700 Steam Generator (continued)
the iron. Allow the iron to heat up until the thermostat light on the iron goes out and the steam ready light illuminates
GREEN.
NOTE: The auto off is only activated after 15 minutes of the steam not being used.
NOTE: When you reactivate the iron after it has been in auto off mode water may have been trapped in the steam hose. Therefore before using the steam generator on a garment direct a shot of steam into the air to release any remaining condensation.
Calc Clean Reminder
Mineral deposits in tap water solidify when the water is heated and can build up in the steam holes and boiler system which can affect steam performance. The Calc Clean light illuminates WHITE to remind you when it is time to flush the boiler. The Calc Clean light illuminates after approximately 20 hours of use. It is important to regularly flush out the boiler to maintain the performance of the ironing system.
NOTE: If all the lights on the control panel illuminate and flash you must decalcify the unit immediately. If the lights continue to flash after you have decalcified the unit please call Customer Services on 1300 881 861.
SEE CARE & CLEANING SECTION ON PAGE 10.
Figure 6
10
