Care and Cleaning
After each use
1.Turn the power off and remove the plug from the power outlet.
2.Allow the iron to cool before storing.
Storage
Empty the water tank before storage.
Always store the iron on the base of the steam generator.
Insert the power cord into the storage compartment.
Wrap the steam cord around the machine for ease of storage.
Warning: "Do NOT empty the boiler during use or at anytime when the steam generator is hot
Cleaning
To clean the exterior of your iron, wipe over with a damp soft cloth and wipe dry.
Caution: Do not use harsh abrasives, chemical cleaners or solvents to clean the exterior of your iron as these will damage the surface.
Cleaning the steam holes
To remove build up from the steam holes which may affect steam performance, use a cotton wool tip moistened in methylated spirits.
Cleaning the soleplate
Wipe with a soft damp cloth and wipe dry.
Caution: Do not use scouring pads, abrasives or harsh cleaners to clean your Teflon Platinum Pro soleplate, as these will scratch and damage the surface.
Warning: Do NOT empty the boiler during use or at anytime when the steam generator is hot.
Figure 7
Calc Clean Reminder
Mineral deposits in tap water solidify when the water is heated and can build up in the steam holes and boiler system which can affect steam performance. It is important to regularly flush out the boiler to maintain the performance of the ironing system.
The Calc Clean light illuminates WHITE to remind you when it is time to flush the boiler. The Calc Clean light illuminates after approximately 20 hours of use.
Calc Clean instructions – using Sunbeam Ironing System Descaling Tablets
NOTE: 1x6g descaling tablet (SR0100) has been included with the SR8700. These are also available from selected retailers. Dissolve 1 x 6g tablet in 400ml of warm water (90 degrees is recommended) in a jug before use.
1.To flush the boiler, turn the unit off and wait for it to cool completely (approx 2 hours).
2.Place the unit on a waterproof surface, or on the edge of the sink.
Caution: If the unit has been used prior to descaling the boiler the calc clean boiler cap will be very hot. Ensure that the unit has cooled completely before commencing the Calc cleaning process.
11
