Care and Cleaning (continued)
8.Shake the unit back and forth to dislodge any scale build up on the base of the boiler. Leave for 10 minutes.
9.Shake the unit again to swirl the solution around inside the boiler.
10.Place the unit on a sink or vessel so that solution can be expelled from the boiler.
11.Carefully remove the calc clean valve and ensure the descaling solution is emptied.
12.Rinse with 400ml of water (90 degrees is recommended) clean water, shake and empty. Repeat rinsing process at least 2 times.
13.Once you have completed the descaling process, and refilled the tank, press and hold the Power button for 3 seconds to switch off the Calc Clean indicator light. The power light will illuminate and the unit will begin heating as normal.
13
