Sunbeam WW4500D manual Using your Non-StickWok, Before First Use, Detachable Cook & Clean Base

Using your Non-Stick Wok

Before First Use

Ensure any stickers are removed from the product. Wash in warm soapy water, rinse thoroughly and dry your wok and lid.

Do not immerse the heat control probe in water or any other liquid.

1.Insert the heat control probe into the socket of the wok.

2.Plug the cord into a 230-240V power outlet and turn the power on.

3.Set the heat control probe dial to the desired temperature setting, or the recommended temperature setting for your required recipe.

Allow 5 minutes for your wok to reach the temperature setting you have selected. The wok is now ready to use.

Note: The thermostat light on the heat control probe indicates the temperature at which the dial is set.

This light will remain on until the set temperature has been reached and then will cycle on and off throughout cooking. This will ensure that the wok maintains the correct temperature.

Detachable Cook & Clean Base

Your Sunbeam Non-Stick Wok features a quick release detachable 'Cook & Clean' base. This enables the base to be quickly and easily removed from the wok cooking vessel.

Simply turn the wok upside down and turn the release dial anti-clockwise as shown in the illustration below.

Quick-release 'cook and clean' base

6