SunBriteTV SB5560HDSL TV Installation - Rear Panel Connections, Connecting with S-Video Fair

TV Installation – Rear Panel Connections

CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX (Continued)

Connecting with S-Video (Fair)	Connecting with
	Composite (Fair)

1.Make sure the power of the TV and your set-top box is turned off.

2.Obtain an S-Video Cable. Connect the S-Video connector to both your set-top box and Composite’s S-Video connector port off the back of your TV.

3.Obtain a RCA Audio Cable. Connect the white color connector to both your set top box and Composite’s white connector port off the back of your TV.

4.Connect the red color connector to both your set top box and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your set top box.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (S-Video).

Please Note :

1.If AV 1 is already occupied, use AV 2 as your connection port and switch source to AV 2 (S-Video).

2.Refer to the set-top box’s manual to make sure the set-top box is configured to output correctly to the TV.

3.This SunBriteTV model supports SONY’s universal remote code. If SunBriteTV is not listed in the manufacturer list, look up SONY’s codes in your universal remote’s hand book.

4.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

1.Make sure the power of the TV and your set top box is turned off.

2.Connect a Yellow Video connector to both your set top box and Composite’s Yellow Video connector port off the back of your TV.

3.Connect a white color connector to both your set top box and Composite’s white connector port off the back of your TV.

4.Connect the red color connector to both your set top box and Composite’s red connector port off the back of your TV.

5.Turn on the TV and your set top box.

6.Use the remote control’s source button or the source button on the right side of the TV to switch to AV1 (CVBS).

Please Note :

1.If AV 1 is already occupied, use AV 2 as your connection port and switch source to AV 2 (S-Video).

2.Refer to the set-top box’s manual to make sure the set-top box is configured to output correctly to the TV.

3.This SunBriteTV model supports SONY’s universal remote code. If SunBriteTV is not listed in the manufacturer list, look up SONY’s codes in your universal remote’s hand book.

4.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

SunBriteTV Model SB-5560HD Operator’s Manual Page 15