APPENDIX

Authenticity label with a genuine copy of the SOFTWARE identifies a licensed copy of the SOFTWARE. To be valid, the label must be affixed to the DEVICE, or appear on Imerge Ltd’s software packaging. If you receive the label separately other than from Sunfire Ltd., it is invalid. You should keep the label on the DEVICE or packaging to prove that you are licensed to use the SOFTWARE.

•Product Support. Product support for the SOFTWARE is not provided by MS, Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to Imerge Ltd. support number provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact Imerge Ltd. for any other reason, please refer to the address provided in the documentation for the DEVICE.

•Termination. Without prejudice to any other rights, Sunfire Ltd. may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE and all of its component parts.

•EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. and European Union export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/.

Macromedia Flash Run-Time Distribution License

Publisher’s end-user license agreement shall contain, at a minimum, the following limitations:

(1)no title to, or ownership rights in the Publisher Product or any portion of the Publisher Product are transferred;

(2)the end-user shall not reverse compile or disassemble the Publisher

Product.

NVIDIA Software License Agreement

This License For Customer Use of NVIDIA Software (“LICENSE”) is the agreement which governs use of the accompanying software of NVIDIA Corporation and its subsidiaries (“NVIDIA”), including any associated printed materials (“SOFTWARE”). By installing or otherwise using

the SOFTWARE, you agree to be bound by the terms of this license (“LICENSE”). If you do not agree to the terms of this LICENSE, do not download, install, activate, or use the SOFTWARE.

RECITALS

The SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE is not sold to the end user, and instead is only licensed for use, strictly in accordance with this document. This agreement sets forth the terms and conditions of the LICENSE for use of the SOFTWARE.

1.DEFINITIONS 1.1 Customer.

Customer means the entity or individual that is the end user of the

SOFTWARE.

2. GRANT OF LICENSE

2.1 Rights and Limitations of Grant.

NVIDIA hereby grants Customer the following non-exclusive, non- transferable right to use the SOFTWARE, with the following limitations:

2.1.1 Rights.

Customer may install and use one copy of the SOFTWARE on a single computer, and except for making one back-up copy of the Software, may not otherwise copy the SOFTWARE. This LICENSE of SOFTWARE may not be shared or used concurrently on different computers.

2.1.2 Limitations.

No Reverse Engineering. Customer may not reverse engineer, decompile, or disassemble the SOFTWARE, nor attempt in any other manner to obtain the source code.

No Separation of Components. The SOFTWARE is licensed as a single product. Its component parts may not be separated for use on more than one computer, nor otherwise used separately from the other parts.

No Distribution. Customer may not distribute, rent or lease the SOFTWARE to third parties.

3. TERMINATION

This LICENSE will automatically terminate if Customer fails to comply with any of the terms and conditions hereof. In such event, Customer must destroy all copies of the SOFTWARE and all of its component parts.

4. COPYRIGHT

All title and copyrights in and to the SOFTWARE (including but not limited to all images, photographs, animations, video, audio, music, text, and other information incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by NVIDIA, or its suppliers. The SOFTWARE is protected by copyright laws and international treaty provisions. Accordingly, Customer is required

to treat the SOFTWARE like any other copyrighted material, except as otherwise allowed pursuant to this LICENSE and that it may make one copy of the SOFTWARE solely for backup or archive purposes.

5. APPLICABLE LAW

This LICENSE shall be deemed to have been made in, and shall be construed pursuant to, the laws of the State of California.

6.DISCLAIMER OF WARRANTIES AND LIMITATION ON LIABILITY; EXPORTS

6.1 No Warranties.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED “AS IS” AND NVIDIA AND ITS SUPPLIERS DISCLAIM ALL CONDITIONS, WARRANTIES, EITHER EXPRESS, IMPLIED, OR STATUTORY INCLUDING, BUT NOT LIMITED TO,ANY EXPRESS OR IMPLIED WARRANTIES OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

6.2 No Liability for Damages.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NVIDIA OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NVIDIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

6.3 Export Laws.

Export and use of the SOFTWARE may be subject to U.S. and foreign export control laws and regulations, including prohibitions on use in the development or production of nuclear, chemical or biological weapons, or in missile technology programs as specified in the U.S. Export Administration Regulations. By downloading, installing, activating or using this SOFTWARE you confirm that you will not export or re-export the SOFTWARE without all required U.S. and foreign government licenses. Customer will defend, indemnify, and hold harmless NVIDIA from and against all fines, penalties, liabilities, damages, costs and expenses incurred as a result of any violation of such laws or regulations by

User’s Manual

55

Page 56 Page 58
Page 57
Image 57
Sunfire TGM-100C user manual Macromedia Flash Run-Time Distribution License, Nvidia Software License Agreement
Page 56 Page 58

TGM-100C, TGM-100 specifications

The Sunfire TGM-100 and TGM-100C are advanced, next-generation gasification systems developed by Sunfire, a pioneer in sustainable energy technologies. These models are designed to convert a broad range of carbon-based feedstocks, such as biomass and waste materials, into high-quality synthesis gas (syngas). Utilizing a unique combination of innovative technologies, they stand out in the realm of clean energy production.

One of the main features of the TGM-100 and TGM-100C is their efficient conversion process. They employ a dual-stage gasification technology that enhances the efficiency of energy extraction from various raw materials. The first stage utilizes pyrolysis, where the feedstock is thermally decomposed in the absence of oxygen, leading to the production of bio-oil and char. This is followed by a gasification stage, where the remaining solid residues are converted into syngas using controlled amounts of oxygen and steam. This two-step process ensures high conversion rates and maximizes energy output.

In terms of technology, both models are equipped with advanced control systems that monitor and optimize the gasification parameters in real-time. These systems improve operational flexibility and reliability, allowing the units to adapt to varying feedstock qualities. Additionally, the TGM-100C version is designed with modular capabilities, making it easier to scale projects according to specific energy needs or feedstock availability.

Another characteristic that sets these models apart is their emphasis on environmental sustainability. The systems are designed to minimize emissions, contributing to a cleaner energy landscape. The syngas produced can be utilized in various applications, including power generation, chemical production, and as a substitute for natural gas in industrial processes.

The TGM-100 and TGM-100C are also notable for their robustness and durability. Built to withstand high operational demands, they feature high-grade materials and components that ensure long-lasting performance even under challenging conditions. These characteristics make them suitable for a range of applications, from industrial settings to remote off-grid locations.

In summary, the Sunfire TGM-100 and TGM-100C represent cutting-edge advancements in gasification technology. With their efficient energy conversion processes, modular capabilities, real-time optimization, and commitment to sustainability, they are a compelling choice for those seeking reliable and environmentally friendly energy solutions.
Top Page Image Contents