SUPER MICRO Computer 5037C-T user manual Replacing the Power Supply

SUPERSERVER 5037C-T User's Manual

6-7 Power Supply

The SC731 chassis includes a 500 watt power supply, which has the capability to automatically sense and operate with an input voltage of 100 to 240V AC. If it becomes necessary to replace the power supply, follow the instructions below.

Replacing the Power Supply

1.Disconnect the chassis from any power source. Also disconnect all power cables that are connected to the motherboard.

2.Remove the screws securing the power supply to the chassis, which are located on the rear of the chassis. Set these screws aside for later use.

3.Gently lift the power supply out of the chassis.

4.Replace the failed power supply with an identical power supply model.

5.Secure the new power supply using the screws previously set aside.

6.Plug the AC power cord back into the module and reconnect the motherboard cables.

7.Power-up the system.

Figure 6-9. Removing the Power Supply

Power Supply

6-10