Chapter 2: Installation

2-4 Mounting the Serverboard into a Chassis

All motherboards have standard mounting holes to fit different types of chassis. Make sure that the locations of all the mounting holes for both the motherboard and the chassis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended because they ground the motherboard to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.

Check the Compatibility of the Serverboard Ports and the I/O Shield

1.The H8SCM(-F) serverboard requires a chassis that can support a board of (LxW) 9.6" x 8.6" (244 x 218 mm) in size.

2.Make sure that the I/O ports on the motherboard align with their respective holes in the I/O shield at the rear of the chassis.

Mounting the Serverboard onto the Tray in the Chassis

1.Carefully mount the motherboard onto the motherboard tray by aligning the motherboard mounting holes with the raised metal standoffs in the tray.

2.Insert screws into all the mounting holes in the motherboard that line up with the standoffs.

3.Then use a screwdriver to secure the motherboard to the mainboard tray - tighten until just snug (if too tight you might strip the threads). Metal screws provide an electrical contact to the motherboard ground to provide a continuous ground for the system.

Caution: Exercise extreme caution when installing or removing memory modules to prevent any possible damage.

2-5 Installing Memory

Installing Memory

1.Insert each memory module vertically into its slot, paying attention to the notch along the bottom of the module to prevent inserting the module incorrectly (see Figure 2-1).

2.Install to slots CPU1/DIMM1A, CPU1/DIMM2A, CPU1/DIMM1B and CPU1/ DIMM2B, etc. Always install in groups of two and in the numerical order of the DIMM slots. See support information below.

3.Gently press down on the memory module until it snaps into place.

Note: 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB size memory modules are supported. It is highly recommended that you remove the power cord from the system before installing or changing memory modules. Please refer to our web site for memory that has been tested on the H8SCM(-F) serverboard.

2-7

Page 26 Page 28
Page 27
Image 27
SUPER MICRO Computer H8SCM-F user manual Mounting the Serverboard into a Chassis, Installing Memory
Page 26 Page 28

H8SCM, H8SCM-F specifications

Super Micro Computer, known for its cutting-edge server technology and enterprise solutions, offers the H8SCM-F and H8SCM motherboards as part of its robust line of products designed for high-performance computing tasks. These motherboards are ideal for businesses that require reliable, scalable, and cost-effective solutions for their data center and server needs.

The H8SCM-F and H8SCM motherboards are based on the AMD Opteron architecture, which delivers an impressive performance-to-cost ratio. They support dual-socket configurations, accommodating up to 16 cores in a single system, which is ideal for handling intensive processing demands. This allows organizations to run virtualization software, database applications, and other resource-heavy tasks with ease.

One of the standout features of the H8SCM-F motherboard is its extensive memory support. It can accommodate up to 512GB of DDR3 memory across eight DIMM slots. This high memory capacity enhances performance, particularly in data-intensive applications, ensuring that users can run multiple processes without facing bottlenecks.

The H8SCM series motherboards also emphasize connectivity. With integrated features such as dual Gigabit Ethernet ports, they support effective bandwidth management. Additionally, the presence of multiple PCI-E slots enables users to incorporate various expansion cards for enhanced connectivity options, including additional network interfaces and high-performance storage controllers.

In terms of storage, the H8SCM-F motherboard offers support for multiple SATA drives, facilitating RAID configurations for improved data redundancy and performance. The ability to implement RAID 0, 1, 5, and 10 provides users with flexibility and security for their data storage needs.

Another key technology integrated into the H8SCM series is advanced thermal management. Supermicro has designed these motherboards with careful attention to airflow and cooling solutions, ensuring that systems remain stable under heavy workloads. This is particularly vital in environments where uptime is critical.

In summary, the Super Micro Computer H8SCM-F and H8SCM motherboards are designed with high-performance, scalability, and reliability in mind. Their support for powerful AMD Opteron processors, substantial memory capacity, extensive connectivity options, and advanced storage and thermal management features make them an excellent choice for businesses seeking efficient server solutions. Whether for virtualized environments or high-demand applications, these motherboards deliver exceptional performance and versatility to meet a wide range of enterprise needs.
Top Page Image Contents