Safety Information and Technical Specifications
4-8 Hard Drive Installation
Each M28 mobile rack includes dummy trays that act as place holders for hard drives. Before using the mobile rack, you must install hard drives into the drive carriers. Hard drives are sold separately.
Release Tab
Hard Drive Tray Latch
Figure 4-2: Mobile Rack with Hard Drive Trays
Installing Hard Drives into the Mobile Rack
1.Press the release tabs to open the hard drive carrier latch.
2.Using the latch as a handle, pull the drive carrier from the hard drive.
!
Warning! Enterprise level hard disk drives are recommended for use in Supermicro chassis and servers. For information on recommended HDDs, visit the Supermicro Web site at www.supermicro.com
