4-7

Safety Information and Technical Specifi cations
4-9 Connect Data and Power Cables
Connecting the Cables
Connect the SAS cables to the mobile rack. A longer SAS cable may be 1.
required (see the recommended cables listed earlier in this manual).
Connect the power cables from the chassis power supply. A power cable 2.
extension may be required.
4-10 Advanced Confi guration
Use the following instructions in the unlikely event that you must access the jump-
ers, buzzer, or other backplane components.
Accessing the Mobile Rack Backplane (Optional)
Remove the two screws that secure the casing to the mobile rack.1.
Slide the casing downward and remove it from the mobile rack.2.
Remove
Screws
Remove
Screw
Remove
Screw
Mobile Rack
Casing
Figure 4-4: Mobile Rack and Rear Casing