2-4

SUPER P3TDDR User’s Manual
Figure 2-2. Installing DDR-RAM into DIMM Slot
2-4 Installing DIMMs

CAUTION

Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.

Memory Module Installation (See Figure 2-2)

1. Insert each DDR-RAM memory module vertically into its slot. Pay
attention to the two notches along the bottom of the module to
prevent inserting the DIMM incorrectly.
2. Gently press down on the memory module until it snaps into place.
3. The P3TDDR has four DIMM sockets that support up to 4 GB of
PC1600 or PC2100 DDR-RAM at their respective speeds
4. DDR-RAM speeds should not be mixed. The P3TDDR can accept any
combination of registered/unregistered and ECC/non-ECC memory,
however it is recommended that different such combinations be used
across the memory installation.
To Install:
Insert module
vertically and
press down
until it snaps
into place.
Pay attention
to the
alignment
notches.