2-14
SUPER P3TDDR User’s Manual
SCSI Enable/Disable
Jumper JP2 is used to enable or dis-
able the onboard SCSI. See the
table on the right for jumper set-
tings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
SCSI Enab le /D is a b le
Jumper Settings (JP2)
VGA Enable/Disable
Jumper JP3 is used to enable or dis-
able the onboard VGA. See the
table on the right for jumper set-
tings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enab le/Disable
Jumper Settings (JP3)
Speaker Enable/Disable
Jumper JP8 is used to enable or dis-
able the system speaker. See the
table on the right for jumper set-
tings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
Speaker Enable/Disable
Jumper Settings (JP8)
VGA IRQ
The VGA IRQ jumper (JP10) is used
to allow BIOS to select the VGA IRQ
(Interrupt Request). See the table
on the right for jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA IRQ
Jumper Settings (JP10)
Jumper
Position
Closed
Open
Definition
Enabled
Disabled
LAN1/2 En a b le /D isable
Jumper Settings (JPL1/2)
LAN Enable/Disable
JPL1 and JPL2 allow you to enable
or disable onboard LAN1 and LAN2,
respectively. See the table on the
right for jumper settings.