Lexmark C736 Printing photos from a PictBridge‑enabled digital camera, Printing information pages

Printing 72

3Press the up or down arrow button until appears next to the document you want to print, and then press .

Note: Folders found on the flash drive appear as folders. File names are appended by the extension type (for example, .jpg).

4Press to print one copy, or enter the number of copies using the keypad, and then press to initiate the print job.

Note: Do not remove the flash drive from the printer until the document has finished printing.

If you leave the flash drive in the printer after leaving the initial USB menu screen, you can still print .pdf files from the flash drive as held jobs.

Printing photos from a PictBridge‑enabled digital camera

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with your camera.

2Insert the other end of the USB cable into the USB port on the front of the printer.

Notes:

•Make sure the PictBridge‑enabled digital camera is set to the correct USB mode. For more information, see the camera documentation.

•If the PictBridge connection is successful, then a confirmation message appears on the printer display.

3Follow the instructions on the camera to select and print photos.

Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the camera.

Printing information pages

Printing a font sample list

To print samples of the fonts currently available for your printer:

1Make sure the printer is on and Ready appears.

2From the printer control panel, press .

3Press the up or down arrow button until Reports appears, and then press .