Lexmark C736, 25A0591 manual Serial x menu, Understanding printer menus 100, Parallel Mode

Understanding printer menus		100
	Menu item	Description
	Parallel Mode 2	Determines whether or not the parallel port data is sampled on the leading or trailing
	On	edge of strobe
	Off	Note: On is the factory default setting.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• The Off setting filters print jobs using the standard protocol.
		• The On setting processes raw binary PostScript print jobs.
	ENA Address	Sets the network address information for an external print server that is attached to
	<xxx>.<xxx>.<xxx>.<xxx>	the printer using a USB cable
		Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Sets the netmask information for an external print server that is attached to the
	<xxx>.<xxx>.<xxx>.<xxx>	printer using a USB cable
		Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA gateway	Sets the gateway information for an external print server that is attached to the
	<xxx>.<xxx>.<xxx>.<xxx>	printer using a USB cable
		Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
Serial <x> menu
	Menu item	Description
	PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When the Off setting is used, the printer does not examine incoming data.
		• When the Off setting is used, the printer uses PostScript emulation if PS
		SmartSwitch is set to On. It uses the default printer language specified in the
		Setup menu if PS SmartSwitch is set to Off.
	PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When the Off setting is used, the printer does not examine incoming data.
		• When the Off setting is used, the printer uses PCL emulation if PCL
		SmartSwitch is set to On. It uses the default printer language specified in the
		Setup menu if PCL SmartSwitch is set to Off.