Administrative support

Finding advanced netwo rking and administrator information

For more advanced system support tasks, see t he Networking Guide on the Software and Documentation CD and the
Embedded Web Server Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Using the Embedded Web Server

1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP se ction under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2Click one of the tabs to access information about the printer, change settings, or view a report.
Note: If the printer is connected to a computer by a USB or parallel cabl e, then open the Local Printer Settings Utility
for Windows or Printer Settings for Macintosh to a ccess printer menus.

Checking the virtual display

The virtual display works as an actual display would work on a printer control panel, sho wing printer messages.
To access the Embedded Web Server, type the printer IP addres s into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP sectio n under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locat e the IP address in the TCP/IP section.
The virtual display appears in the top left corner of the screen.

Checking the device status

From the Device Status page of the Embedded Web Server, it is poss ible to see paper tray settings, the level of toner
in the toner cartridge, the percentage of life remaining in the photoconductor kit, and capacity measurements of certain
printer parts.
1Type the printer IP address in the address field of your Web browser.
Note: If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP se ction under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2Click Device Status.
Administrative support 145