Additional printer setup

46

iMake sure the box next to the selected printer model is checked.

jSelect any other optional software you want to install, and then click Next.

kClick Finish to complete the printer software installation.

3Set the COM port parameters:

After the printer driver is installed, you must set the serial parameters in the COM port assigned to the printer driver.

The serial parameters in the COM port must match the serial parameters you set in the printer. a Open the Device Manager.

1Click , or click Start and then click Run.

2In the Start Search or Run box, type devmgmt.msc.

3Press Enter, or click OK. The Device Manager opens.

bClick + to expand the list of available ports.

cSelect the communications port where you attached the serial cable to your computer (example: COM1).

dClick Properties.

eOn the Port Settings tab, set the serial parameters to the same serial parameters in the printer. Look for the printer settings under the serial heading on the menu settings page you printed earlier.

fClick OK, and then close all the windows.

gPrint a test page to verify printer installation. When a test page prints successfully, printer setup is complete.

Page 45 Page 47
Page 46
Image 46
Lexmark C736, 25A0591 manual Click Properties
Page 45 Page 47
Top Page Image Contents