58 Too many trays attached
1Turn the printer off.
2Unplug the power cord from the wall outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
59 Incompatible tray <x>
Only options designed specifically for this printer are suppo rted.
Try one or more of the following:
Remove the specified tray.
Press the up or down arrow button until Continue appears, and then press to clear the mes sage and con tinue
printing without using the specified tray.
61 Remove defective hard disk
Press the up or down arrow button until Continue appears, and then press to clear the mes sage and con tinue
printing.
Install a different hard disk before performing any operations that require a hard disk.
62 Disk full
Press the up or down arrow button until Continue appears, and then press to clear the mes sage and con tinue
processing.
Delete fonts, macros, and other data stored on the hard di sk.
Install a larger hard disk.
63 Unformatted disk
Press the up or down arrow button until Continue appears, and then press to clear the mes sage and con tinue
printing.
Format the disk.
If the error message remains, the hard disk may be defective and requ ire replacing.
80.xx Fuser near life warning
Press the up or down arrow button until Continue appears, and then press to clear the mes sage and con tinue
printing.
Order a replacement fuser immediately. When print quality is r educed, install the new fuser using the instruction
sheet that came with the replacement part.
Troubleshooting 166