Lexmark 25A0591, C736 Replacing the waste toner box, Yes appears Press Press until Ready appears

Maintaining the printer 141

If you see Ready on the printer display after you have replaced a photoconductor, continue with steps 1–7:

1To specify the replaced photoconductor, press .

Supplies Menu appears.

2Press .

Replace Supply appears.

3Press .

4Press the up or down arrow button until All, Cyan photoconductor, Magenta photoconductor, Yellow photoconductor, or Black photoconductor appears, depending on the photoconductor you just replaced.

5Press .

<color> photoconductor replaced appears.

Yes appears.

6Press .

7Press until Ready appears.

Replacing the waste toner box

Replace the waste toner box when 82 Replace waste toner box or 82 Waste toner box nearly full appears. The printer will not continue printing until the waste toner box is replaced.

1Unpack the replacement waste toner box, and remove it from its shipping box.

1

2

2Locate the waste toner box release button on the left side of the printer.

3Press the release button to the left, and pull the waste toner box out to remove it from the printer.

1

2