TESTING AND TROUBLESHOOTING
4.3.2Alarm Messages
Alarm messages pertain to events that occur within the TRXI. Press the Display button and hold for five seconds to access the alarm messages queue. You can scroll through each message by pressing the Display button. If you do not press the Display button for ten seconds, the LCD defaults to the product name.
Displayed Messages | Comments |
No Messages in | No alarm messages in queue. This is |
Queue | the Alarm Messages default setting. |
Port xxxxxx | Network port or TPIM turned off |
Disabled | via Local or Remote Management. |
Port xxxxxx | Network port or TPIM turned on |
Enabled | via Local or Remote Management. |
Port xx Violation | Indicates unauthorized access |
| attempt at network lobe ports. |
Ring Beaconing | Indicates a station is attempting to |
| recover from a hardware problem on |
| the ring. |
Beacon Recovered | Indicates the ring has recovered |
| from a beaconing situation. |
Beacon Recv | Indicates that a station has been |
Port xx Removed | removed from the ring as a result of |
| the beacon recovery process. |
Ring Port xx Faulted | Indicates a TPIM RI or RO has |
| Autowrapped. |
Fault Recovery Oscillation | Indicates that the network has been |
| in and out of a beaconing state |
| several times. |
Page
