INSTALLATION
3.4SETTING THE RING SPEED SWITCH
The TRXI’s Ring Speed switch lets you select ring speeds of 16 Mbps or 4 Mbps. The factory default setting of the Ring Speed Switch
is 16 Mbps. Figure
To change the ring speed:
1.Turn off the TRXI.
2.Place a small screwdriver through the TRXI’s air vent to access the Ring Speed Switch.
3.Use the screwdriver to slide the switch to the desired setting as shown in Figure
4.Turn on the TRXI.
5.Check that the Ring Speed LED indicates the correct setting.
RING SPEED SWITCH SETTINGS
16 Mbps | 4 Mbps |
Ring Speed LED Indicator
On = 16 Mbps
Off = 4 Mbps
Figure 3-6. The Ring Speed Switch
Page
