Cabletron Systems TRXI-24, TRXI-22, TRXI-42, TRXI-44 manual Installing a Tpim to the Trxi

INSTALLATION

3.8.2Installing a TPIM to the TRXI

To install a TPIM, perform the following steps:

Caution: Observe all static precautions while handling TPIMs.

1.Remove the mounting screw from the faceplate of the RI/RO port on the TRXI.

2.If you are replacing a TPIM, remove the mounting screw and pull the TPIM straight out from the TRXI.

3.Slide the new TPIM into place as shown in Figure 3-12.

4.Ensure the connectors on the rear of the module and on the inside of the TRXI mate properly.

5.Reinstall the mounting screw.

RO

18

6

17

5

16

4

15

3

14

2

13

1

LNK

TPIM-T1

RI

LNK

-T1 TPIM

Figure 3-12. Installing a TPIM

Page 3-13