![](/images/new-backgrounds/1186026/18602653x1.webp)
REQUIREMENTS/SPECIFICATIONS
Parameter | Typical | Minimum | Maximum |
Transmitter Peak |
|
|
|
Wave Length | 1300 nm | 1270 nm | 1330 nm |
Spectral Width | 60 nm | - | 100 nm |
Rise Time/ | 3.0 nsec | 2.7 nsec | 5.0 nsec |
Fall Time | 2.5 nsec | 2.2 nsec | 5.0 nsec |
Duty Cycle | 50.1% | 49.6% | 50.7% |
Bit Error Rate: | Better than |
|
Note: The transmitter power levels given above are Peak Power Levels after optical overshoot. You must use a Peak Power Meter to correctly compare the values given above to those measured on any particular port. If you are measuring power levels with an Average Power Meter, add 3 dBm to the average power measurement to correctly compare the average power values measured to the values listed above (i.e.,
Page