INSTALLATION
CHAPTER 3
INSTALLATION
This chapter outlines the procedure for installing a TRXI and connecting it to a network. Be sure that your network meets the guidelines and requirements outlined in Chapter 2, Requirements/ Specifications, before installing the TRXI.
3.1UNPACKING THE TRXI
Unpack the TRXI as follows:
•Remove the TRXI from the shipping box.
•Slide the two foam end caps off the TRXI.
•Remove the TRXI from the protective plastic bag and set it aside to prevent damage.
•Visually inspect the TRXI. If there are any signs of damage, contact Cabletron Systems Technical Support immediately.
3.2ATTACHING THE STRAIN RELIEF BRACKET
Attach the strain relief bracket to the front of the TRXI as follows:
1.Locate the strain relief bracket and four
Caution: Use of longer screws may cause damage to the unit or electrical shock.
Page
