Headset Indicator Light
If you are not on a call, you can toggle the headset
Subscribing a Headset
The headset and USB adapter that are supplied together are already subscribed to each other. However, if you wish to use a new headset with your existing USB adapter or you need to restore subscription to your current headset, the units can be subscribed to each other by the following method:
1Ensure your headset is charged.
2Double press the subscription button on the USB adapter. The USB adapter will flash red and green.
3Press the volume up button (press volume down for left ear configuration) on the headset for three seconds until the headset indicator light turns solid white.
4When the indicator light on the USB adapter goes solid green, the headset and the USB adapter are subscribed to one another.
To ensure subscription was successful, press the call control button: the headset will flash white and the USB adapter will flash green.
NOTE If the subscription process times out after two minutes or if the subscription process fails, the USB adapter indicator light will become solid red for four seconds and then return to its previous state. If this occurs, try to
Ending Subscription
If the USB adapter is in subscription mode and you want to stop the adapter from searching for a headset, press the subscription button again. The subscription light will turn solid red for four seconds and then go to its previous state.
Plantronics Savi User Guide | 12 |
