4 System Setup
Connecting the Power Supply
1Connect the base power supply into the power jack on the Deluxe Charger Base.
2Connect the power supply to the outlet. The power indicator light will be solid green.
Charging the Spare Battery
Both the Deluxe Charge Base and Deluxe Charging Cable can charge both the headset battery and the spare battery simultaneously or independently if desired. The spare battery is shipped with Savi 445 in the Deluxe Charger Base battery compartment. See “Replacing Your Headset Battery”for details on replacing your battery even during a call.
Charging the Battery in the Charge Base.
1Ensure the deluxe charger base is powered on and the battery is correctly seated in the battery compartment. While charging the battery charge indicator will flash green; once fully charged the charge indicator will be solid green.
Docking and Charging the Headset
1Gently push the headset into the charging cradle.
The charging indicator light on the headset will flash white to indicate that the headset battery is charging and will turn solid white when fully charged.
2Charge for at least 20 minutes prior to first use. A full charge takes 3 hours.
CHARGING TIME
20 min ..................... 
Minimum charge before first use
3 hours ....................
Full charge
Charging Indicator Light
Power Indicator Light
NOTE The USB charging cable can also be used to charge the headset.
To successfully charge your headset with the USB cable the PC must be on and in an active state (not standby). The charging time will vary according to the number of other
devices drawing power from the PC’s USB port(s).
Charging the Battery in the Deluxe USB Charger.
1Connect the USB charger to an available USB port on PC.
2Set the battery on the
Plantronics Savi User Guide | 8 |
