Lexmark 25A0591, C736 manual Paper jams, Clearing jams 149

Clearing jams 149

Jam number	Jam location	What to do
200–201	In the printer	Open the front door, remove the photoconductor unit, and
		then remove any jams.
202	In the printer	Open the front door and top cover, and then remove any
		jams.
203	In the printer or standard exit	Open the front door and top cover, and then remove any
	bin	jams.
230	In the printer	Remove Tray 1, open the front door, and then remove any
		jams.
24x	In the paper trays	Open each tray, and then remove any jams.
250	In the multipurpose feeder	1	Remove all media from the multipurpose feeder.
		2	Flex and stack the media.
		3	Reload the multipurpose feeder.
		4	Adjust the paper guide.

200–201 paper jams

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

1Open the front door.

Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the front door open longer than 10 minutes.

2If the jam is behind the toner cartridge area, pull the jammed paper up and out.

Note: Make sure all paper fragments are removed.