Troubleshooting

169

88.2x Replace <color> cartridge

1The toner cartridge is exhausted. Replace the specified toner cartridge.

Note: To learn how to replace a toner cartridge, press the up or down arrow until Show Me appears, and then press .

2Clear the paper path to clear the message and continue printing.

Solving basic problems

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

The power cord is plugged into the printer and a properly grounded electrical outlet.

The electrical outlet is not turned off by any switch or breaker.

The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.

Other electronic equipment plugged into the outlet is working.

The printer is turned on. Check the printer power switch.

The printer cable is securely attached to the printer and the host computer, print server, option, or other network device.

All options are properly installed.

The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the printer back on. This often fixes the problem.

Embedded Web Server does not open

These are possible solutions. Try one or more of the following:

CHECK THE NETWORK CONNECTIONS

Make sure the printer and computer are turned on and connected to the same network.

CHECK THE NETWORK SETTINGS

Depending on the network settings, you may need to type https:// instead of http:// before the printer IP address to access the Embedded Web Server. For more information, see your system administrator.

Page 169
Image 169
Lexmark 25A0591, C736 manual Solving basic problems, 88.2x Replace color cartridge, Solving basic printer problems