Lexmark 25A0591, C736 Network Reports menu, This menu is available from the Network/Ports menu

Understanding printer menus		91
	Menu item	Description
	Job Buffering	Temporarily stores jobs on the printer hard disk before printing. This menu only
	Off	appears if a formatted disk is installed.
	On	Notes:
	Auto	• Off is the factory default setting.
		• The On value buffers jobs on the printer hard disk. This menu selection
		appears only when a formatted disk is installed and is not defective.
		• The Auto setting buffers print jobs only if the printer is busy processing data
		from another input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is updated.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• The Off setting filters print jobs using the standard protocol.
		• The On setting processes raw binary PostScript print jobs.
	Std Network Setup	For descriptions and settings of the network setup menus, see the following:
	Reports or Network Reports	• “Network Reports menu” on page 91
	Network Card	• “Network Card menu” on page 92
	TCP/IP	• “TCP/IP menu” on page 92
	IPv6
		• “IPv6 menu” on page 94
	Wireless
		• “Wireless menu” on page 94
	AppleTalk
		• “AppleTalk menu” on page 95
	NetWare
		• “NetWare menu” on page 95
	LexLink
	Net <x> Setup	• “LexLink menu” on page 96
		Note: The Wireless menu appears only when the printer is connected to a wireless
	Reports or Network Reports
		network.
	Network Card
	TCP/IP
	IPv6
	Wireless
	AppleTalk
	NetWare
	LexLink

Network Reports menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Reports or Network

Reports