Managing SNAplus2 Clients
Managing Win32 Clients
The parameters
The Logging subkey specifies logging options for the client. These options can be used to specify client logging settings that override the logging options specified for the domain as a whole. For more information about specifying domain logging options, see “Configuring Logging”.
If central logging is enabled, all log messages are written to a central file on a server. In this case, only the exception_logging_enabled and audit_logging_enabled parameters specified here are used; the remaining parameters are ignored.
The logging options are specified as follows:
exception_logging_enabled
The Registry data type of this value is REG_SZ.
Set this parameter to one of the following values:
YES
Record exception messages.
NO
Do not record exception messages.
This parameter is optional. If it is not specified, the Win32 client uses the global domain settings to determine whether exception messages are recorded. (The initial default is that exception messages are recorded.)
audit_logging_enabled
The Registry data type of this value is REG_SZ.
Set this parameter to one of the following values:
YES
Record audit messages.
NO
Do not record audit messages.
Chapter 11 | 263 |