HP UX SNAplus2 Host, Figure, Chapter, Example Configurations, Standalone SNAplus2 Node That Communicates Directly with a

Introduction to SNAplus2

Example Configurations

	Example Configurations
	SNAplus2 can be used as a standalone system to support direct
	communication with a host or another SNA node, within a LAN to
	support SNA communications across the LAN, or as a gateway to support
	communication between a host and systems in a LAN.
	A computer running SNAplus2 configured as a standalone system that
	communicates directly with a host computer is shown in Figure 2-1,
	“Standalone SNAplus2 Node That Communicates Directly with a Host.”
Figure 2-1	Standalone SNAplus2 Node That Communicates Directly with a
	Host

Several SNAplus2 nodes configured as an APPN network are shown in Figure 2-2, “SNAplus2 Nodes in an APPN Network.” SNA is used for peer communication within the LAN as well as over the SDLC link.

Chapter 2 69