Configuring APPC Communication
Configuring APPC Security
The password to be accepted in an incoming conversation from a remote node. The password can be up to 10 characters long. This password is not related to
Additional Configuration
After configuring conversation security, you can configure 5250 communication as described in Chapter 8, “Configuring User Applications.”
Configuring a Security Access List
You can define an APPC security access list to control access to an LU or TP (or both). This list can be referred to by the definition for an APPC local LU or TP.
To configure a security access list, use one of the following methods:
Motif administration program
Select APPC, Security, and
The following parameters are required for security access list configuration:
Name
Name of the security access list. The definition for an APPC TP or local LU can use this name to refer to the access list.
Users in access listThe names of users included in the security access list.
206 | Chapter 7 |