HP UX SNAplus2 manual Additional Port Parameters for Implicit PU, Concentration

	Defining Connectivity Components
	Defining Ports, DLCs, and Connection Networks
	The underlying stack is also configured with an address and accepts only
NOTE
	calls that specify an address starting with the configured address. Any
	address configured on the port must start with the address configured on
	the stack; otherwise, calls accepted by the stack are subsequently
	rejected by the port.
	Additional Port Parameters for Implicit PU
	Concentration
	Maximum active template instances
	Specify the maximum number of link station instances
	to be generated from the template.
	Configure downstream LUs for implicit PU access
	Whether to configure downstream LUs that use this
	PU (see “Configuring PU Concentration”).
	Additional Configuration
	After performing the port configuration, continue with the following
	configuration tasks:
	• To define a link station on a port you have configured, see “Defining
	Link Stations”.
	• To define a DLUR PU, see “Defining DLUR PUs”.
	• To support APPC communication, see Chapter 7, “Configuring APPC
	Communication.”

Chapter 5 153