Explains how to configure connectivity for the SNAplus2 node.
Chapter 6, “Configuring Dependent LUs.”
Explains how to configure dependent LUs (logical units) for LU types
Chapter 7, “Configuring APPC Communication.” Explains how to configure APPC (advanced
Chapter 8, “Configuring User Applications.”
Explains how to configure user applications.
Chapter 9, “Configuring Passthrough Services.”
Explains how to configure passthrough services, which support communication between host systems and local systems that are not directly connected.
Chapter 10, “Managing SNAplus2 from NetView.”
Explains how to use the SNAplus2 remote command facility (RCF) to manage SNAplus2 and run commands on SNAplus2 nodes from a host running NetView.
Chapter 11, “Managing SNAplus2 Clients.”
Explains how to configure and manage SNAplus2 clients.
Appendix A, “Configuration Planning Worksheets.”
Provides configuration worksheets for SNAplus2. Appendix B, “APPN Network Management Using the Simple Network Management Protocol.”
Provides information about the support provided by SNAplus2 for the Simple Network Management Protocol (SNMP). This appendix also provides a list of the APPN Management Information Base (MIB) databases that SNAplus2 supports.
Appendix C, “Configuring an Invokable TP Using snaptpinstall.” Provides information about the snappinstall utility and how it can be used to define an invokable TP.
Appendix D, “Using SNAplus2 in a High Availability Environment.” Describes the high availability features of SNAplus2 and how it works with the HP MC/ServiceGuard product.
16