HP UX SNAplus2 manual Snaptpinstall -afilename, Snaptpinstall -r -t TPname -l LUalias

Configuring an Invokable TP Using snaptpinstall

Overview

Overview

The snaptpinstall utility is a command-line application that enables a user or the writer of a TP installation program to define an invokable TP. You can run snaptpinstall on a server or client.

The syntax of the command is different depending on whether you are defining, removing, or querying TP definitions:

Define an invokable TP:

	snaptpinstall -afile_name
	This command adds one or more TP definitions from
	the specified file_name. If the TP named in the file has
	already been defined, the information in the file
	replaces the existing definition. For information about
	the required file format, see “File Format for
	snaptpinstall”.
	Remove an invokable TP definition:
For UNIX	snaptpinstall -r -t TP_name -l LU_alias
For Windows	snaptpinstall -r -t TP_name
End of Section	This command removes the entry that has both the
	same TP name and (on HP-UX machines) the same LU
	alias. The LU alias applies only on HP-UX machines;
	omit that parameter when removing a TP definition
	from a Windows client.
	Query invokable TP definitions:
For UNIX	snaptpinstall -q -t TP_name -l LU_alias
For Windows	snaptpinstall -q -t TP_name
End of Section	This command queries the entry that has both the
	same TP name and (on HP-UX machines) the same LU
	alias. The LU alias applies only on HP-UX machines;
	omit that parameter when querying a TP definition
	from a Windows client. If you do not include any
	options, the command queries all invokable TP
	definitions.

344 Appendix C