Managing SNAplus2 Clients

Managing Win32 Clients

This parameter is optional. If it is not specified, the default is 1000000 (bytes). If you are logging error and audit messages to the same file, this parameter must be set to the same value as the error_file_wrap_size parameter.

succinct_errors

The Registry data type of this value is REG_SZ. Specifies whether to use succinct logging or verbose logging in the error log file. This setting applies to both exception logs and problem logs. You can specify either of the following values:

YES

Use succinct logging: each message in the log file contains a summary of the message header information (such as the message number and log type) and the message text string and parameters. To obtain more details of the cause of the log and any action required, you can use the snaphelp utility on a computer running HP-UX.

NO

Use verbose logging: each message in the log file includes a full listing of the message header information, the message text string and parameters, and additional information on the cause of the log and any action required.

This parameter is optional. If it is not specified, the default is taken from the previous set_global_log_type command issued to the master server (or set using the Motif administration program). The initial default, before any set_global_log_type command has been issued, is to use succinct logging.

If you are using central logging, the choice of succinct or verbose logging for messages from all computers is determined by the setting of this parameter on the server acting as the central logger; this setting may either be from the set_global_log_type command, or from a set_log_type command issued to that server to override the default.

succinct_audits

266

Chapter 11