HP UX SNAplus2 manual Configuring RJE Workstations, RJE Workstation Configuration Parameters

NOTE

Configuring User Applications

Configuring RJE Workstations

Configuring RJE Workstations

You can define an RJE workstation to submit jobs to a host computer for processing. The RJE workstation also handles the output returned by the host.

You must configure at least one RJE LU before defining an RJE workstation.

To configure an RJE workstation, use one of the following methods:

Motif administration program

Select RJE Workstations on the Windows menu on the Node window.

Command-line administration program Issue the following command:

define_rje_wkstn

RJE Workstation Configuration Parameters

The following parameters are required for RJE workstation configuration:

Workstation name

A name by which users can identify the RJE workstation (for example, when they start the workstation or submit jobs). The workstation name must be 1–4 characters long.

You may find it helpful to use the workstation name that is defined on the host computer, but it is not necessary to do this.

Run on computer

The name of the HP-UX system on which the RJE workstation runs. If you do not supply this value, the workstation can run on any computer.

UNIX user name

The HP-UX system user name of the primary user of the RJE workstation. The user must be a valid user of the HP-UX system on which the RJE workstation runs.

220 Chapter 8