HP UX SNAplus2 manual CStracing, Fmi

Managing SNAplus2 Clients

Managing Win32 Clients

The maximum size of the trace file. If two file names are specified, tracing switches between the two files when the current file reaches this size. If only one file name is specified, this parameter is ignored; the file size is not limited.

This parameter is optional. If it is not specified, the default is 1000000 (bytes).

truncation_length

The Registry data type of this value is REG_DWORD. The maximum length, in bytes, of the information written to the trace file for each message. If a message is longer than this, SNAplus2 writes only the start of the message to the trace file, and discards the data beyond truncation_length. This enables you to record the most important information for each message but avoid filling up the file with long messages.

This parameter is optional. If it is not specified, SNAplus2 does not truncate messages (all the data from each message is written to the file).

fmi

The Registry data type of this value is REG_SZ.

To trace 3270 messages, set this parameter to YES; otherwise, set it to NO. This parameter is optional. If it is not specified, the default is NO.

CS_tracing

The CS_tracing subkey specifies options for client/server tracing (tracing on messages between the client and SNAplus2 servers). For more information about tracing, refer to HP-UX SNAplus2 Diagnostics Guide. The tracing options are specified as follows:

file1

The Registry data type of this value is REG_SZ.

The full path name of the trace file, or of the first trace file if tracing is to two files (see the description of the file2 parameter).

This parameter is required if you want to enable client/server tracing; you also need to set the trace_flags parameter.

file2

Chapter 11 271